Accesorios para Motorola MC7x/MC70/MC75/MC75A


Estos productos son compatibles con:

Terminales Motorola MC7x/MC70/MC75/MC75A


         Código             


                  Fotografía                               


            Descripción              


        Observaciones        


Artículos requeridos  

Cradles/Charging

 

 

CRD7X001000RR                  

 

 

 

 

 

Single Slot Cradle

 

Provides Serial/RS232 or USB support.

 Supports terminal and spare battery charging (1X to 2.5X).

LED notification of spare battery charging    status.

Provides IEEE1725 compliance for MC75  series.  

Micro USB connection on cradle end. 

 PWRS-14000-148R

 50-16000-220R.

 Also requires for host  communication:

 25-63852-01R

 25-685596-01R

 

CRD7X00-101RES

 

Single Slot Cradle Kit

Serial/RS232 or USB support.

Supports terminal and spare battery  charging (1 to  2.5X).

LED notification of spare battery charging  status.

Includes PWRS-14000-148R.

Provides IEEE1725 compliance for MC75 series.

Energy Star Compliant.

 50-16000-220R

 Also requires for host 
 
communication:

 25-63852-01R

 OR

 25-68596-01R

 

 

CRD7X00-4000CR

 

4-Slot Charge Only Cradle

 

Charges 4 terminals.

Does not charge spare batteries.

Provides IEEE1725 compliance for MC75 series. 

 

PWRS-14000-241R

 50-16002-029R

 50-16000-220R

 

CRD7X00-401CES

4-Slot Charge Only Cradle Kit 

 

Charges 4 terminals.

Does not charge spare batteries.

Provides IEEE1725 compliance for MC75 series.

Includes:  PWRS-14000-241R power  supply. 

50-16002-029R DC line cord.

Energy Star Compliant.

 50-16000-220R
                       
CRD7X01-4000ER

4-Slot

Ethernet/Charging 

Cradle 

Charges 4 terminals.

Does not charge spare batteries.

Ethernet connectivity to host.

Ethernet daisy chain support.

USB Host connection to MC70 - does not require additional software on device.

 PWRS-14000-241R

 50-16002-029R

 50-16000-220R

CRD7001-411EES

4-Slot

Ethernet/Charging 

Cradle Kit

Same as CRD7X01-4000ER, but includes:

PWRS-14000-241R

50-16002-029R

Energy Star Compliant.

 50-16000-220R  
KT-136648-01R Wall Mount Bracket for 4-Slot Cradles
Allows cradle to be mounted on a wall.

 CRD7X01- 4000ER

 OR

 CRD7000-4000CR

VCD7X00-P000R    Vehicle Cradle 

Provides spare battery charging.

Provides RS232 DB9 connector for  serial communications.

Includes wiring harness from cradle to  vehicle, fuse cable, nuts and washers.

Provides IEEE1725 compliance for MC75  series.

Requires integrator/ installer to mount the cradle in the vehicle.
 
KT-118547-01R  Vehicle Cradle washers, nuts, fuse cable   These parts are included with the Vehicle Cradle (VCD7X00).   
SAC7X00-4000CR    4-Slot Battery Charge  

Charges spare batteries only (1X to  2.5X size).

Provides IEEE1725 compliance for  MC75  series.

Same charger used by MC3000 (does  not support MC50).

The shims are used with the MC70.

 PWRS-14000-148R

 50-16000-220R

 KT-76490-01R

 
SAC7X00-401CES    4-Slot Battery Charger Kit  

Same as SAC7X00-4000CR, but also  includes PWRS-14000-148R

Provides IEEE1725 compliance for  MC75 series.

Energy Star Compliant.

 50-16000-220R
 
KT-76490-01R Spare Battery Adapter Shims for 4-Slot Battery Charger

Includes 5 shims.

These shims already ship with  SAC7X00-4000CR

 
25-70979-02R MC70/75 Auto Charge/Cigarette Lighter Adapter Cable    
25-95214-03R   Charge only Cable  Cup 

5 inch long cable.

Convenient for those customers who only  require cable charging when traveling.

Provides IEEE1725 compliance for MC75 series.

Cable cup is redesigned to fit tighter and  more securely on the MC70/MC75.

New cable cup design incorporates a latching feature  to prevent it from inadvertently disconnecting when  attached to the MC70/MC75.

 PWRS-1400-249R               

 50-16000-255R 

Communication Cables

25-102775-02R


USB Communi./

     Charging 

   Cable with Cup

 

Provides IEEE1725 compliance for MC75 series.

Cable cup is redesigned to fit tighter and  more securely on the MC70/MC75. 

 PWRS-14000-249R            

 50-16000-255R

                                                        

25-102776-02R 


 

RS232/Serial 

Communication/ Charging 

Cable with Cup

Cable cup is redesigned to fit tighter and  more securely on the MC70/MC75.

Provides IEEE1725 compliance for MC75 series.

 PWRS-14000-249R

 50-16000-255R

 

25-63852-01R

 

RS232/Serial Single-

Slot cradle to

ActiveSync PC/Host cable 

 

 CRD7000-1000RR

 OR

 CRD7X00-1000RR 

25-68596-01R

 

USB Single-Slot cradle

to ActiveSync PC/Host

cable

 

 CRD7000-1000RR

 OR

 CRD7X00-1000RR

25-76793-02R

  DEX Cable

Cable cup is redesigned to fit tighter and  more securely on the MC70/MC75.

New cable cup design incorporates a latching feature to prevent it from inadvertently disconnecting when  attached to the MC70/MC75. 

 

MDM9000-100R 

  Modem Module Connects to MC70 via CRD7000-1000RR (Single Slot Cradle).

 25-63856-01R

 CRD7000-1000RR

 OR

 25-70924-03R 

25-63856-01R 

Modem Cable for Single-Slot Cradle 

Needed to connect the MDM9000-100R (Modem Module) to the CRD7000-1000RR (Single Slot Cradle).

Allows single slot cradle to be used as a  modem cradle.

 MDM9000-100R

 CRD7000-1000RR

KT- MC3000SERMOD EMR
Modem Kit for Single Slot Cradle 

Includes: 

MDM9000-100R 

25-63856-01R.

Allows single slot cradle to be used as a  modem cradle. 

 CRD7000-1000RR
25-70924-04R Modem Cable Cup Adapter

Needed to connect the MDM9000-100R (Modem Module) to the MC70 with out using a cradle.

Cable cup is redesigned to fit tighter and  more securely on the MC70/MC75.

 MDM9000-100R
25-70979-02R Modem Kit

Includes:

MDM9000-100R                                    

25-70924-04R

25-116536-01R Programming Cable for DCR7X00

Needed for programming and key injection.

Cable connects PC to DCR7X00 via serial port. 

 50-14000-249

 R50-16000-255R 

KT-DCR7X00-CBL-ITLES Programming Cable Kit for DCR7X00

Includes:

25-116536-01R

PWRS-14000-249R

Needed for programming and key  injection.

Cable connects PC to DCR7X00 via serial  port.

Energy Star Compliant. 

 50-16000-255R 
25-91515-02R Cable Cup Adapter to Zebra QL Series Printers

Cable cup is redesigned to fit tighter and  more securely on the MC70/MC75.

New cable cup design incorporates a latching feature to prevent it from inadvertently disconnecting when attached to the MC70/MC75.

25-91519-02R  Cable Cup Adapter to O'Neil Printers 

Cable cup is redesigned to fit tighter and  more securely on the MC70/MC75.

New cable cup design incorporates a latching feature to prevent it from inadvertently disconnecting when attached to the MC70/MC75.

Snap-On Accessories

 

 

 

 

KT-70982-02R 

 

 

 

 

          

 

 

 

 

MC70/MC75 Snap-On Pistol Grip handle

 

Works with 1X - 2.5X batteries.

Supports connecting to charging cable.

MC7X can be dropped into Single Slot or  4-  Slot cradle while in the Pistol Grip handle.

Does not work with MC7095 (EVDO) or MC7094+GPS units.

 Includes two Cleats which attach to MC70 (21-91535-0  2R) or MC75

(21-126676-01R) for securing the device  in the handle.

                                         
21-126676-01R  Spare MC75 Cleat for Pistol Grip handle

Used if one Pistol Grip handle will be used with multiple MC75 units.

One cleat is included with each Pistol Grip  handle 21-70982-02R

 
21-91535-02R Spare MC70 Cleat for Pistol Grip handle

Used if one Pistol Grip handle will be used with multiple MC70 units.

One cleat is included with each Pistol  Grip  handle KT-70982-02R

Cleat has improved audio jack cover and  improves retention of the terminal to the trigger handle. 

 
MSR7000-100R Snap-On MSR (Mag Stripe Reader)

Supports the following formats: ANSI, ISO, AAMVA, CA DMV and user- configurable generic format.

Supports connection of charging cables.

MC70 can be inserted and charged in  the Single  Slot or 4-Slot cradle with the  MSR attached.

 
MSR7000-120R Snap-On MSR (Mag Stripe Reader) for extreme ESD environments

Supports the following formats: ANSI, ISO, AAMVA, CA DMV and user- configurable generic format.

Supports connection of charging cables.

MC7X can be inserted and charged in the  Single Slot or 4-Slot cradle with the MSR attached.

 
DCR7X00-100R Snap-On DCR (Debit Card Reader)

Has 13-key pin pad on bottom of snap-on that will encrypt PIN data.

Back of unit has one line 13-character LCD display.

Supports connection of charging cables and provides USB pass-through.

MC7X can be inserted and charged in the Single Slot or 4-Slot cradle with the MSR attached.

PED/PCI, APCA compliant

Reads 3 MSR tracks to allow driver's license cards to be read. Communicates serially to MC7X.

 
DCR7X00-200R

 

Snap-On DCR (Debit Card Reader) with Smart Card Reader

Has 13-key pin pad on bottom of snap-on that will encrypt PIN data.

Back of unit has two line LCD display.

Supports connection of charging cables and provides USB pass-through.

MC7X can be inserted and charged in the Single Slot or 4-Slot cradle with the MSR attached.

PED/PCI, APCA compliant. Reads 3 MSR tracks.

Communicates serially to MC7X. Full contact Smart Card reader. 2 SAM card slots.

Includes compliant software to enable Chip & PIN transactions.

EMV 1 and 2 certifications. 

 
MC7XFPR-01R Snap-On Biometric reader 

Finger Print Only - for MC7X Terminals.

Fingerprint Sensor: FIPS 201 certified, 508 DPI.

Environmental and drop specifications are the same as the MC75. 

 
Miscellaneous

 

SG-MC7011110-02R

                                                        
          

         Rigid Holster with            Belt Clip

Provides a secure place to store the terminal on the user’s hip. The terminal is inserted with the screen toward the users body so that the display is protected.

While in the hard case, the user is free to use the headset as the headset jack is exposed. The side keys can also be accessed so that volume and push to talk can be activated during a call.

This version includes a minor tooling modification to the left and right snaps at the base of the rigid holster. This modification was made to optimize the snap performance thereby extending the usable life of the holster. Also has a larger belt clip to more securely hold the rigid holster, preventing unintentional removal of the holster.

Holster can't be used when Trigger Handle21-70982-01R is attached.  

 

11-77967-01R  MC70 Fabric Holster with Belt Clip    
SG-MC7521215-01R   MC75 Fabric Holster with Belt Clip Has additional access hole on the back of the case for the color camera.  
SG-MC7X21216-01R
MC7x Terminal and Biometric snap-on Case/Holster

Designed to hold the MC7X terminal and biometric attachment onto user’s belt (up to 3.5” wide).

The case secures the two-piece hardware solution, preventing accidental damage or loss, should a user drop the MC7X and biometric attachment.

The case is designed to ensure access to all hardware features of the MC7X biometric solution.  

 

STYLUS-00002-03R

(pack of 3) 

Spare Spring Loaded Tethered Stylus This is the stylus that ships with the unit. It may have a different tether cord on it though.   

STYLUS-00004-03R

(pack of 3)

Spare Spring Loaded Tethered Stylus - Health Care blue color  This is the stylus that ships with the MC75A Health Care color unit. It may have a different tether cord on it though.  

KT-73440-01R

(pack of 3) 

Non-Elastic Tethers for stylus    
RCH51 
Rugged Cabled Headset 

Noise cancelling microphone filters ambient noise inches away.

 xtremely rugged strain relief features ensure cable bend tolerance, even at -30C.

IP67 sealing throughout the headset protects sensitive components from moisture and dust.

High-strength plastics survive 6 ft drop at -30C & 500 tumbles

Weight: 4 oz.

 See HEADSET     ACCESSORIES       for additional      accessories
21-69024-01R  Headset 
Used to make phone calls.  

KT-67525-01R

(pack of 3)

 

 

 

 

  Screen   Protector

For use with applications with high touch screen usage, Symbol recommends the use of a screen protector to minimize wear and tear.

Screen protectors enhance the usability and durability of touch screen displays.

Benefits include: - Protection from scratches and gouges. - Durable writing and touch surface with tactile feel. - Abrasion and chemical resistance. - Glare reduction. - Keeping the device's screen looking like new.


Power Cords/ Power Supplies

PWRS-14000-249R

Power Supply with integrated DC Cord

 

Replaces KT-14000-148R

Used to power Single Slot Cradle and SACX000 4-Slot Battery Charger.

100-240 VAC,12VDC,3.33A. Energy Star Compliant.

50-16000-220R
 

 

PWRS-14000-241R

 

Power Supply

Replaces 50-14000-241R Used to power Four Slot Cradles.

100-240VAC,12VDC,9A. Energy Star Compliant.

 

 

 

50-16000-220R


3 wire AC Line Cord

 

 

 

 

 

50-16000-255R

 

2 wire AC Line Cord

 

 

BTRY-MC7XEAB0E

BTRY-MC7XEAB0E-10 (10 pack)

BTRY-MC7XEAB0E-50 (50 pack)

 

Spare 1X Battery (1950mAh)

   

BTRY-MC7XEAB00

BTRY-MC7XEAB00-10 (10 pack)

BTRY-MC7XEAB00-50 (50 pack)


Spare 1.5X Battery (3600mAh)
   

BTRY-MC7XEAB0H

Spare 2.5X Battery (4800mAh) Form factor equivalent to the 2X 3800 mAh battery,however, a 2.5X battery door is required to prevent thedevice from getting damaged.   

KT-105877-01R

1X Battery Door and Handstrap
Used when converting a unit to a 1x battery configuration.  BTRY-MC7XEAB00
KT-105878-01R
1.5X Battery Door and Handstrap
Used when converting a unit to a 1.5x battery configuration.
BTRY-MC7XEAB00 
KT-139500-01R
1.5X Battery Door and Handstrap - Health Care White color
Used when converting an MC75A Health Care color unit to a 1.5x battery configuration.
BTRY-MC7XEAB00
KT-79429-01R
2X Battery Door and Handstrap
Used when converting a unit to a 2x battery configuration.
BTRY-MC70EAB02
KT-105879-01R 2.5X Battery Door and Handstrap Used when converting a unit to a 2.5x battery configuration BTRY-MC7XEAB0H
KT-139501-01R 2.5X Battery Door and Handstrap Used when converting an MC75A Health Care colorunit unit to a 2.5x battery configuration. BTRY-MC7XEAB0H
BTRY-KT-1X-MC7XR 1X Battery Door and Handstrap with Battery (1950 mAh) Kit    
BTRY-KT-1R5X-MC7XR 1.5X Battery Door and Handstrap with Battery Kit    
BTRY-KT-2R5X-MC7XR 2.5X Battery Door and Handstrap with Battery Kit Form factor equivalent to the 2X 4800 mAh battery.  

6K-13HMS-003

(pack of 10)

(right latch)

6K-13HMS-004

(pack of 10) (left latch)

Spare Battery Door Latches    

47-13H39-001

(pack of 100)

Spare Battery Door Orings O-rings are used to attach the battery door latches to the battery door.  

Choose your country:

No, thanks